Chemical Reduction

ScaleBlaster can significantly reduce the need to use chemicals for the prevention of corrosion and scale. No more handling & storage of hazardous chemicals.

Reduces Corrosion

ScaleBlaster allows for increased cycles of concentration which naturally and gently elevates the pH of the re-circulating water, thereby rendering the water less corrosive.  ScaleBlaster controls scaling potentials, which lessens troublesome corrosive cell formations of calcium/iron deposits on the metal surfaces.  ScaleBlaster helps control biofilm formation where bacteria can actively attack all metal surfaces.

Increases Cycles of Concentration = Water Savings

By allowing the conductivity levels to go higher, you may be able to raise the cycles of concentration – which will result in huge water savings.

Improves Efficiency

ScaleBlaster keeps heat transfer surfaces free from scale allowing systems to operate under optimal design conditions.

Prevents Scale Accumulation

ScaleBlaster will modify the scale-forming ions, so they do not adhere to each other, the pipe walls, tubes, jets and heat transfer surfaces.

Reduces Maintenance & Downtime
  • ScaleBlaster will significantly reduce overall maintenance & downtime.  Adding chemicals, balancing water chemistry and cleaning shutdowns will be greatly reduced.

 
Controls Algae & Bacteria

ScaleBlaster helps control algae and bacteria by eliminating their breeding ground – limescale deposits.  The modified calcium crystals and higher cycles of concentration help to retard algae and biofilm formations.

Huge Energy Savings

The primary energy savings are a result of a decrease in energy consumption in heating or cooling applications. These savings are associated with the removal of scale formation. Just a 1/4” of scale buildup can increase energy consumption 40%.

Removes Existing Scale

Any existing scale within the system is removed within weeks and never returns. Contact us for more information on how we can prove this to you when ScaleBlaster is installed.

Extends Life of Capital Equipment

ScaleBlaster will extend equipment life dramatically, maximizing the return on capital investment.

Decrease Operating Costs

ScaleBlaster allows you to significantly lower your cost of operation by using less chemicals and less water, as well as reducing labor costs.

Environmentally Friendly
  • Discharge water regulations have made the disposal of chemically treated water a regulatory concern. ScaleBlaster is non-invasive and adds nothing to the water, simplifying your compliance measures.

  • SB-1200

    • Up to 12″ non-magnetic pipe
    • Up to 6″ magnetic pipe on recirculating water
    • Up to 3″ pipe on one-shot magnetic pipe
    • Input Voltage: 90-264VAC at 47-63Hz
    • Input Current: 2A rush @ 115VAC, 1A rush @ 230VAC
  • SB-2000

    • Up to 20″ non-magnetic pipe
    • Up to 14″ magnetic pipe on recirculating water
    • Up to 8″ pipe on one-shot magnetic pipe
    • Input Voltage: 90-264VAC at 47-63Hz
    • Input Current: 2A rush @ 115VAC, 1A rush @ 230VAC
  • SB-2800

    • Up to 28″ non-magnetic pipe
    • Up to 20″ magnetic pipe on recirculating water
    • Up to 10″ pipe on one-shot magnetic pipe
    • Input Voltage: 90-264VAC at 47-63Hz
    • Input Current: 5 A rush @ 115VAC, 2.5A rush @ 230VAC

SB-3600

  • Up to 36″ non-magnetic pipe
  • Up to 24″ magnetic pipe on recirculating water
  • Up to 12″ pipe on one-shot magnetic pipe
  • Input Voltage: 90-264VAC at 47-63Hz
  • Input Current: 5 A rush @ 115VAC, 2.5A rush @ 230VAC
  • SB-4000

    • Up to 40″ non-magnetic pipe
    • Up to 26″ magnetic pipe on recirculating water
    • Up to 16″ pipe on one-shot magnetic pipe
    • Input Voltage: 90-264VAC at 47-63Hz
    • Input Current: 6A rush @ 115VAC, 3A rush @ 230VAC